I User Set Mode - Icom IC-F43TR Instruction Manual

6
CONVENTIONAL OPERATION
D DTMF receiving and transmitting
—Optional UT-108 is required—
If the transceiver has [Send DTMF] assigned to it, a DTMF
encode channel is displayed when pushed, and assigned
DTMF encode channels can be selected via [UP] or [DOWN].
Receiving:
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the conventional system channel, in sequence.
w Push [Select call] to mute the channel. (" " appears)
e When receiving a call, a beep is emitted and mute is
released. (" " disappears)
Transmitting:
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the conventional system channel, in sequence.
w Push [Send DTMF]— a DTMF encode channel appears.
e Push [UP] or [DOWN] to select the desired DTMF encode
channel.
r Push [PTT] to transmit the selected DTMF code in the
selected DTMF channel.
• Push [P0] to cancel the DTMF transmission.
16

I User set mode

User set mode is accessed with [User Set Mode] and allows
you to set seldom-changed settings. In this case you can
"customize" the transceiver operation to suit your preferences
and operating style.
Entering the user set mode:
q Push and hold [User Set Mode] to enter user set mode.
Push [User Set Mode] momentarily to select the item.
Then push [UP] or [DOWN] to set the desired level/condi-
tion.
Available set mode functions:
• Backlight : ON, Auto or OFF
• Ringer : ON or OFF
• Beep : ON or OFF
• SQL Level : 0 to 255
• Mic Gain : 1 to 5
• Battery Voltage : ON or OFF
• System Information : ON or OFF
• Run-Time : The transceiver's running time is
displayed.
w Push and hold [User Set Mode] to exit user set mode.