Axminster SBW3501B Instruction Manual page 8

Main Assembly
Step 2 Line up the remaining holes in the two parts of
the assembly and secure using the remaining M6 bolts,
washers and nuts (20-22-25), securely tighten all fixing,
see figs 03-04.
Fig 03
Fig 04
Fig 05
Mounting the Bandsaw
WARNING!! WHEN MOUNTING THE
UNIT, WE STRONGLY ADVISE YOU
GET THE ASSISTANCE OF ANOTHER
PERSON BECAUSE THE BANDSAW IS
HEAVY .
Lift the saw on to the stand and line up the pre-drilled
holes, see fig 05, secure using the eight M8 coach bolts
(26) and M8 shoulder nuts (23), see fig 06.
23
26
Mounting the Emergency Stop Assembly
Step 1 Locate the two domed head Phillips screws (24)
and M4 nuts (21), see fig 07. loosen the four Phillips
screws from the front of the emergency stop housing
and very carefully open the outer cover, see fig 08.
24
8
Fig 06
Fig 07
21
Fig 08