Table of Contents
Advertisement
Routing Maintenance
Daily
• Keep the machine clean.
• Check the saw blade for missing teeth and
cracks, see fig 89.
• Spray oil the bare metal surfaces.
Weekly
• Open the top and bottom wheel covers and clean out
all saw dust.
Clean out impacted 'crud' and saw dust
Clean out impacted 'crud' and saw dust
Monthly
• Open the lower and upper door and check the
condition of the tyres and the drive belt, see figs 88-89-
90.
• Clean impacted 'crud' from the tyres, apply a little oil to
the screw threads of the blade and drive belt tensioners.
DO NOT USE OIL near the belt.
• The pivots and the slides of the top wheel mounting
assembly and the captive stub axle of the belt tensioner
in its slot could likewise be lightly oiled.
• Using an air line (wearing goggles) blow out the motor
casing.
C
• Check the condition of the tyres (A)
• Check for missing teeth (B)
• Check the condition of the drive belt (C)
28
Fig 88-89-90
A
B
Advertisement
Table of Contents
