Updating Software Revisions - Cornelius IDC PRO 255 Service Manual

IDC Pro 255 Service Manual
Step
Press the Shutdown button to start the shutdown
4 process or press the Restart button to restart the
unit.
Red/Black button on back of screen shown in Figure 70. To prompt screen push button & select Restart or
5
Shutdown. To hard shutdown hold for 5-7 sec until screen get blank. Wait for 10 sec and press once to restart.
U S
PDATING OFTWARE
The unit can be updated as new versions of software become available, they may be installed on the unit by perform-
ing the procedure in Table 23.
Step
1 Enter Service mode, as described in "Service Mode" section on page 21.
2 Open the display panel.
On the back of the display, unplug the USB con-
nection as shown in Figure 70 to the ADA panel
3
and plug in the USB stick with the software update
loaded on it.
Publication Number: 621058649SER
Table 22.
Action
R
EVISIONS
Table 23.
Action
- 34 -
Figure 69.
Figure 70.
© 2016, Cornelius Inc.