Single Board Computer
Step
Remove the single board computer cover by
unscrewing the four screws.
1
NOTE: The fan connection will be on the
board.
2
Disconnect all the harness connected to the board.
Unscrew the two screws and pull the sheet metal
3
block towards downward.
Unscrew the screw from all the four corners and
4
take the single board out.
© 2016, Cornelius Inc.
Table 8.
Action
- 15 -
IDC Pro 255 Service Manual
Figure 22.
Figure 23.
Figure 24.
Figure 25.
Publication Number: 621058649SER