Diagnostic Flow Chart For Ice Maker Control Board #6100499 - KitchenAid KUIS155H Technical Education

DIAGNOSTIC FLOW CHART FOR
ICE MAKER CONTROL BOARD #6100499
Before using this chart, confirm that you have electronic control board #6100499.
Look for the part number on the control, or use the following procedure:
1. Disconnect the bin thermistor.
2. Place the unit into the Clean mode.
3. If the Clean LED flashes 2 times, it is the new control. The old control will not
flash the LED.
OVERVIEW
When "Clean" has ended
and "Power On" is
selected go this direction
Clean Mode begins
(See page 6-11)
Service Mode begins
(See page 6-11)
Clean may be selected
at anytime. When
selected go this direction
The unit is first turned
on, ("On" is pressed)
Flush Mode begins
(See page 6-6)
5 minute Flus h
Mode ends
Idle Mode begins
(See page 6-7)
Idle Mode ends
when the bi n i s
not full
Freeze Mode begins
(See page 6-8)
6-5
When Harvest ends
go this direction if
the bin is full
When Harvest ends
go this di rection i f
the bin is not full
When time, or
temperature is
sat isfied go th is
direct ion
Harvest Mode begins
(See page 6-9)