Time in this mode is dependent on the temperature at the bin thermistor.
Idle Mode:
Idle Mode
If "Clean"
Service/Clean Mode
(Idle Mode continues
is selected
begins (See page 6-11)
as long as bin is full)
If the bin thermistor is
When the bin is
not sensed by the
not full
control
Failure Mode begins
Freeze Mode begins
(See page 6-10)
(See page 6-8)
NOTE: "Bin Full" setpoint is 38°F. The unit will stay in the "Idle Mode" as long as the
ice in the bin touches the bin thermistor and keeps it lower than 38°F.
6-7