A/C Head Azimuth And X-Value Adjustment (Sd 50M); Rev Tape Path Confirmation And Adjustment (T4 Post Height Adjustment) - Panasonic AJ-SDX900P Service Manual

1-18. A/C Head Azimuth and X-value Adjustment (SD 50M)

TEST POINT
ADJUSTMENT MODE
<25M and 50M mode setting procedure>
1. Press the "MENU button" pushing "HOLD button" and "LIGHT button" together so that "CAM SERVICE MENU"
screen is appears on VF and VIDEO OUT.
2. Press the "JOG DIAL button" to select the "MAIN MENU" (Menu display is change like below)
CAM SERVICE MENU → VTR SERVICE MENU
3. Set the item "REC MODE" to 25M MODE referring following process.
MAIN MENU → SYSTEM SETTING → SYSTEM MODE → REC MODE 4:3/25M (or 16:9/25M)
4. In case of 50M mode, set to 4:3/50M (or 16:9/50M) on item "REC MODE".
<Adjustment mode setting procedure>
1. Press the "MENU button" pushing "HOLD button" and "LIGHT button" together so that "CAM SERVICE MENU"
screen is appears on VF and VIDEO OUT.
2. Press the "JOG DIAL button" to select the "VTR SERVICE MENU" (Menu display is change like below)
CAM SERVICE MENU → VTR SERVICE MENU
3. Rotate the "JOG DIAL button" to select the item "VTR SERVICE 2/3" in "VTR SERVICE MENU" screen and
press the "JOG DIAL button" to open the "VTR SERVICE 2/3" menu screen.
4. Select item "X VALUE SET" rotating "JOG DIAL button".
5. Press "JOG DIAL button", then displayed character "OFF" is flashed.
6. Rotate the "JOG DIAL button" to select the display "ON".
NOTE: The character "ON" is flash condition, which is adjustment mode.
Click this button , then go to item "1-18. A/C Head Azimuth and X-value Adjustment (SD 50M)" .

1-20. REV Tape Path Confirmation and Adjustment (T4 Post Height Adjustment)

TEST POINT CTL: TP1(SERVO P.C.B.)
VTR MODE PLAY(+1)
REV(-1)
<25M mode setting procedure>
1. Press the "MENU button" pushing "HOLD button" and "LIGHT button" together so that "CAM SERVICE MENU"
screen is appears on VF and VIDEO OUT.
2. Press the "JOG DIAL button" to select the "MAIN MENU" (Menu display is change like below)
CAM SERVICE MENU → VTR SERVICE MENU
3. Set the item "REC MODE" to 25M MODE referring following process.
MAIN MENU → SYSTEM SETTING → SYSTEM MODE → REC MODE 4:3/25M (or 16:9/25M)
<REV(-1) Mode Setting Procedure>
1. Set the VTR to STILL mode by press PLAY button twice.
2. Keep pressing RESET button and press PLAY button.
Click this button , then go to item "1-20. REV Tape Path Confirmation and Adjustment (T4 Post Height
Adjustment)" .
R/P ENV: TP1(HEAD BUFFER P.C.B.), R/P HSW: TP2(HEAD BUFFER P.C.B.)
CUE: TP901(AUDIO LCD P.C.B.), CTL: TP1(SERVO P.C.B.)
X VALUE SET(SERVICE MENU)
→
→
PLAY on 25M mode
REV -1 on 25M mode(how to set PLAY and REV x1 mode, refer to below
description)
→
MAIN MENU
MAIN MENU
MAIN MENU
MECH-64