Panasonic AJ-SDX900P Service Manual page 31

<PLD (MEM) : FM FPGA>
1. Connect a PC, CPLD writer (VFK1590 / ALTERA P2) and AJ-SDX900 (8P connector).
2. Set the rotary switch to E position.
3. Turn on both PC and AJ-SDX900.
4. Execute MAX+plus2 programmer.
5. Click 'MAX+plus2' – 'Programmer'.
6. Click 'JTAG' – 'Multi-Device JTAG Chain Setup...'.
7. Click 'Restore JCF ..'.
INF-21