7. Wait for loading data until the process indicator reaches 100%.
8. Click 'Start(W)', and version-up starts.
9. Version-up is completed when the process indicator reaches 100%. 'Operating information' shows
"Waiting to start or completed" when version-up is completed.
10. Push 'EXIT' button to end the program.
11. If an error occurs, the window below appears. In this case, check the setting of the rotary switch,
connection and the power on both PC and Camcorder. Then, repeat from step 3.
12. Turn off and on the camcorder in order to restart it.
13. Confirm that the software version is updated.
INF-18