Mode Switch - Sharp XE-A1BT Service Manual

3. MODE SWITCH

1) MODE SWITCH OUTLINE
Type Rotary switch type with Mode key
STEP 5
2) LAYOUT
3) FUNCTION
Turns the display off. No operations are possible
REG
Permit transaction entry
Permit correction after final a transaction
X/Flash
Permits printing of sales reports and display the
flash reports
Z/PGM
Permits printing and resetting of sales reports and
programming
4. DISPLAY
1) OPERATOR DISPLAY
Display device LED numeric display
Number of line 1 line
Number of positions 9 digits numeric display (V model)
Color of display Yellow Green
Character size Numeric: 14.2 (H) x 8.0 (W) mm
5. PRINTER
1) PRINTER
Printing system Thermal printer
Printing digits 30 digits
Character size
1.25 mm(W) x 3.0 mm (H)
Printing speed Approx. 7lines / Sec.
Cutter type Manual
Validation printing None
Logo stamp None
Ink roller None
Ink Ribbon None
Graphic Logo Print Yes (Size: 360 mm(W) x 180 mm(H))
Paper end sensor
Receipt side Yes
Journal side None
Paper near end sensor
Receipt side None
Journal side None
Printer cover key None
2) PAPER
Paper type
Paper roll width
Paper roll diameter
Paper Thickness
Paper weight
6. DRAWER
1) DRAWER BOX AND DRAWER
Material
Bell
Release lever
Drawer open sensor
2) MONEY CASE
Separation from the drawer
Separation of the bill
compartments from the coin
compartments
Bill separator
Number of compartments
1-2
Thermal paper
57.5 ±0.5mm
φ80mm
72 to 78μm
2
66 to 72g/m
Plastic
--
Standard equipment: situated at the
bottom
--
Disallowed
Allowed
-
3B/6C (V model)