Chapter 2. Options; Chapter 3. Matser Reset - Sharp XE-A1BT Service Manual

CHAPTER 2. OPTIONS

1. OPTIONS
Product name Model
Optional battery XE-A1BT
2. SERVICE OPTIONS
Price
Parts code
rank
LANGK7612BHZZ AF
LANGK7613BHZZ AN
XHBS730P06000 AC
3. SUPPLIES
Item Parts code
Roll paper DPAPR1025CSZZ
INK Roller NROLR1022RCZB
Thermal
TPAPR6656RC05
paper
*Handled as service parts
CHAPTER 3. MASTER RESET
Master reset:
Clears all the memory and initializes each preset parameter.
The master reset should be performed by using the following
procedure.
1. Turn off the power (Power OFF). (See Note 1))
2. Let the ECR be without the memory back up battery.
3. Turn the mode switch to the others of Power-off position.
4. Turn on the power (Power ON). (See Note 2))
When the master rest is completed, the buzzer sounds
intermittently three times.
5. Attach the memory back up battery to the ECR.
The master reset can also be accomplished in the following
case. (See Note 3))
Note 1) Power OFF:
Means disconnecting the AC power supply to the
machine. (Specifically, unplugging the machine)
Note 2) Power ON:
Means connecting the AC power to the ma-chine.
(Specifically, plugging in the machine)
Description
Optional battery
(for XE-A147)
Description
Fix angle A
tumble prevision
(for
Fix angle B
tumble prevision
(for
Screw (for set the fix angle)
Price
Description
rank
5 Rolls / Pack
AV
(For XE-A107)
Ink roller
AZ
(For XE-A107)
5 Rolls / Pack
BA (For XE-A137 /
XE-A147)
4. SPECIAL SERVICE TOOLS
Parts code
UKOG-2374RCZZ
)
)
Note 3) In case a power failure occurs when the machine
has no battery installed, the master reset operation is
automatically performed after the power has been
restored.
2-1
Price
Description
rank
RS232C loop back test tool
AV
(For XE-A147)