Siemens SIMATIC ET 200pro Manual page 11

Example configuration with electronic module and motor starter
Between an interface module and a terminating module you can adapt the electronic
modules, motor starters and frequency converters to your applications in whatever
configuration you require.
The figure below shows an example configuration of the ET 200pro distributed I/O system
with motor starter and repair switch module.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
ET 200pro distributed I/O EtherNet/IP interface module
Manual, 03/2016, A5E32861915-AB
2.2 What is the ET 200pro distributed I/O system?
ET 200pro EtherNet/IP interface module (with connection module)
Repair switch module
DSe; Standard
8 DI DC 24 V
Terminating module
Cap
Motor connection
Power jumper plug
Infeed
Product overview
11