Mj-1039 (Offline Stapler) - Toshiba e-STUDIO477S Service Manual

(5) Lift the equipment up and remove the spacer.
2.1.6

MJ-1039 (Offline stapler)

(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Take off the right side cover.
 P. 6-1 "6.1.1 Right side cover"
(5) Take off the SYS board cover.
 P. 6-4 "6.1.2 SYS Board cover"
(6) Disconnect the connector.
(7) Remove 2 screws and take off the offline
stapler.
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-12
Fig. 2-13
Fig. 2-14
2 - 5
e-STUDIO477S/527S/477SL
DISASSEMBLY AND REPLACEMENT
2