Replacement Parts - Powermatic PM1800B Operating Instructions And Parts Manual

Trouble
Machine will not
start/restart or
repeatedly trips circuit
breaker or blows
fuses.
(continued)
Band Saw does not
come up to speed.

17.0 Replacement Parts

Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-
274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model Number and Serial Number of
your machine available when you call will allow us to serve you quickly and accurately.
Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from
Powermatic. Some parts are shown for reference only, and may not be available individually.
Probable Cause
Switch failure.
Extension cord too light or too long.
Low current.
Remedy
If the start/stop switch is suspect, you
have two options: Have a qualified
electrician test the switch for function, or
purchase a new start/stop switch and
establish if that was the problem on
change-out.
Replace with adequate size and length
cord.
Contact a qualified electrician.
34