Chapter 2 Operation Guide - Excell EX-2001 Racer Plus User Instructions

EXCELL PRECISION CO., LTD.

CHAPTER 2 OPERATION GUIDE

FUNCTION
General function
setting
Capacity parameter
setting
Calibration
Self-diagnosis mode
Reset all parameters
back to default
Reset general function
parameter back to
factory standard setting
Display software version
Function parameter
setting
EX-2001 Plus v1.3
OPERATION PROCEDURE
Press and hold the
then press the
F n
Switch the capacity calibration
switch to "ON"
and then press the
Switch the capacity calibration
switch to "ON"
C A L
and then press the
Turn on the indicator,
press and hold
the indicator starts the self-test
procedure.
Switch the calibration switch to
"ON", turn on the indicator,
press and hold
F n
while the indicator is in the
self-testing sequence
Turn on the indicator,
F n
press and hold
by pressing
while the indicator is in the
self-testing sequence
Turn on the indicator,
press and hold the
C A L
while the indicator is in the
self-test sequence
Press and hold
followed by pressing
key,
Refer to Chapter 9 Functions Table
to set FUNC. 0 ~ FUNC. 7
Set the parameter for decimal
point, max. capacity, min. division,
zero tracking, unstable detection
Refer to < 5-1 > Parameter Setting
F n
Calibration procedures.
Refer to < 5-2 > Calibration Setting
and Refer to < 8-3 > Self-diagnosis
Refer to < 8-1 > Reset All
and
Parameter Back to Default
, followed Refer to < 8-2 > Reset General
Function Parameter Back to
The main display section displays
the software version, press any key
,
Hi, Lo, Zero Band parameter
C A L
5
DESCRIPTION
Mode for details
Default
to exit
setting
SME300000060