Excell EX-2001 Racer Plus User Instructions page 25

EXCELL PRECISION CO., LTD.
2
Refer to Chapter 9 Function Table to set FUNC. 60 ~ FUNC. 67
2
Transmit format
S T , G
Header 1 Header 2
Header 1
ST : Stable / US : Unstable / OL : Over Load
Header 2
GS : Gross weight / NT : Net weight / TR : Tare
Weight Data ( 8 digits )
The first digit is the + / - symbol for weight value. The next seven digits include
decimal point and weight value.
When the weight is over loaded ( Header 1 : OL ), all digits will be transmitted "blank"
(sp) except the + / - signal and the decimal point.
Units
Kg, g, t, lb or "blank"
Terminators
CR, LF is the data finish code.
2
Command mode
COMMAND
READ, RW
ZERO, MZ
TARE, MT
NTGS
ΠThe command string must be terminated with CR ( 0DH ) , LF ( 0AH ).
• If a wrong command is received, the indicator will reply "E" + " error command ".
Ž If the command mode has been selected "with address", (FUNC. 61 = 4)
then every command must be preceded with an indicator address in the format:-
" @ address "
Example: To read the weight value form indicator addressed as 01 ("01" selected in
FUNC. 67)
EX-2001 Plus v1.3
S , + 1 2
Weight Data ( 8 digits )
Switches gross / net weight
MG
MN
CT
The complete command is @01RW<CR><LF>
3 4 . 5
FUNCTION
Reads weight
Back to zero
Tare
Displays gross weight
Displays net weight
Clears tare
23
6 g CR LF
Units Terminators
SME300000060