Estimated Latitude; Estimated Longitude - Raymarine GPS navigation Operation Manual

The sensors always store the Lat/Lon position in memory. The next time
you use the unit, the only thing you'll have to do is just turn it "ON".
NAV
In a few minutes your position will be displayed.

3.4.1 Estimated Latitude

With the
"
ESTIMATED POSITION
your position, using six digits. It is a good idea to enter your position to within
one degree of latitude. When the numbers are correct. nress(.
ESTIMATED POSITION
THENPRESSENTER
ENTERING INITIAL POSITION
If you're new to navigation terminology, please refer to the Globe figure
on the previous page for verifying that the coordinate to be entered is truly
your latitude.
Check to see that the direction symbol "N" is correctly indicated to the left
of your latitude entry on the screen. If "S" is displayed, press thelN/Sbof?key
to change the symbol to "N". Press -1 when the direction is correct.
Example: Press 4,2,0,5,0,0, I-J-[, for N 42' 05.00'
key and start the entry again. When the entry is correct, press -ito
accept the entry.
3.4.2 Estimated Loneitude
entry, the message on the display screen will
enter your estimated longitude numeric value, this
time using seven digits-with an accuracy within
OPERATION 3-6
screen displayed, enter the latitude of
"
ESTIMATED POSITION
THEN PRESS ENTER
W 071' 25.10+~aom=
Asbefore,
How to read a Lat/Long
DEGREES
r