Make A Route - Raymarine GPS navigation Operation Manual

3.9.1 Making Route Plans.
Press themlkey and the
screen appears. Press thejm[softkey.
When the lm[key is pressed, the MAKE
Selection screen appears to prompt you to choose a
route number for your route plan. Choose any number
from those listed on the screen and press(ENTER(
Example: 4, -1, for route plan 4.
The display willchangeto the
display and prompt you to enter your starting way-
point. Enter the waypoint # of the first point in the
route. Then press -1. I f t h e m e m o r y n u m b e r
you typed does not contain waypoint data, the unit will
emit multiple beeps whe@i%ZJis pressed and return
the prompts to ---.
Example: Type 4,mlfor waypoint # 004.
The screen will show the From waypoint as 004 and
add the "TO" entry line for the next waypoint number
entry. Type the digits of the next point in the route plan. If you make a
mistake, press the)m[key and re-type the number.
Example: Type 1,5, (ENTERlfor
The Name of the waypoint, and
displayed in the lower section of the screen. If the waypoint is correct, press
now as #O 15. The prompt "LEG" now appears and to enter the next waypoint
in your route plan press thd=j softkey.
now appears and the last waypoint you entered has become the
LEG
"From" waypoint in leg 2. Type in the digits of the next waypoint #023 and
"
ROUTE MODE
ROUTE
MAKE ROUTELEGS
of the leg will be calculated and
OPERATION 3-31
MAKE ROUTE