Raymarine GPS navigation Operation Manual page 37

Enter the waypoint Longitude coordinates by typing the numeric value.
Begin with a "0" if the Longitude is less than 100'. Press 1-1 when the
value is correct anqn\again if the direction is displayed correctly. If
the indicated direction is incorrect, press the softkey for "E" or "w".
Example: Press 0,8,2, 1, 0,2, S,Im(ENTER[ Long. = W 82' 10.25'
When m[ is pressed, a
display while the unit is storing the new waypoint and then the screen
changes back to the Waypoint Directory.
key returns you to the
This
lar memory number to continue waypoint entries, press1
If you want to recheck the new entry, press1
Press -1 if you are finished. This will return you back to the previous
display mode.
3.6.4.2. Storing by TDs
To enter the waypoint coordinates in Loran-C Time Differences, on the
STORE WAYPOINT menu press them softkey.
Enter the TD 1 coordinate by typing in the nu-
when the TDl value is OK.
Example: Press 2,7, 1, 0, 1,5, -1.
Enter the TD2 coordinate by typing the numeric
value in using six digits. Press 1-1 when the TD2 value is OK.
Example: Press 4,4,2, 1, 0,2, -1 TD2 = 44210.2~s
t h e u n i t w i l l n o w c a l c u l a t e a " c o r r e c t e d " L / L
to store as the waypoint. During the calculation process the unit
will display a
"
CALCULATING
the message to disappear before continuing.
" "
CALCULATING
NAME
message on the screen. Please wait for
"
message appears on the
page and advances the
ENTER
key. -