Chapter 1: Getting Started; Starting The Web-Based Switch Configuration Utility - Cisco 200 Series Administration Manual

Getting Started

Starting the Web-based Switch Configuration Utility

Cisco Small Business 200 Series Smart Switch Administration Guide
This chapter provides an introduction to the user interface, and includes the
following topics:
• Starting the Web-based Switch Configuration Utility
• Quick Start Switch Configuration
This section describes how to navigate the web-based switch configuration utility.
Browser Restrictions
• If you are using a pop-up blocker, make sure it is disabled.
Browsers have the following restrictions:
• If you are using Internet Explorer 6, you cannot directly use an IPv6 address
to access the switch. You can, however, use the DNS (Domain Name
System) server to create a domain name that contains the IPv6 address,
and then use that domain name in the address bar in place of the IPv6
address.
• If you have multiple IPv6 interfaces on your management station, use the
IPv6 global address instead of IPv6 link local address to access the switch
from your browser.
1
9