Password Expiration; Logging Out - Cisco 200 Series Administration Manual

Getting Started
Starting the Web-based Switch Configuration Utility
!
CAUTION
Cisco Small Business 200 Series Smart Switch Administration Guide
If you entered an incorrect username or password, an error message is displayed,
and the Login Page remains displayed. If you are having problems logging in,
please see the Launching the Configuration Utility
Business 200 Series Smart Switch Administration Guide for additional information.
Select Don't show this page on startup to prevent the Getting Started page from
being displayed each time that you log on to the system. If you select this option,
the System Summary page is opened instead of the Getting Started page.

Password Expiration

Password Expiration
The New Password Page is displayed:
• The first time you access the switch with the default username cisco and
password cisco. This page forces you to replace the factory default
password.
• When the password expires, this page forces you to select a new
password.

Logging Out

Logging Out
By default, the application logs out after ten minutes of inactivity. You can change
this default value as described in the
General Administrative Information and Operations
Unless the Running Configuration is copied to the Startup Configuration, all
changes made since the last time the file was saved are lost if the switch is
rebooted. Save the Running Configuration to the Startup Configuration before
logging off to preserve any changes you made during this session.
A red X icon displayed to the left of the Save application link indicates that Running
Configuration changes have been made that have not yet been saved to the Startup
Configuration file.
section in the Cisco Small
Defining Idle Session Timeout
chapter.
1
section in the
11