Configuring Lldp Med Port Settings - Cisco 200 Series Administration Manual

Configuring Discovery
Configuring LLDP
STEP 4
STEP 1
STEP 2
STEP 3
Cisco Small Business 200 Series Smart Switch Administration Guide
- Softphone Voice
- Video Conferencing
- Streaming Video
- Video Signaling
• VLAN ID—Enter the VLAN ID to which the traffic should be sent.
• VLAN Tag—Select whether the traffic is Tagged or Untagged.
• User Priority—Select the traffic priority applied to traffic defined by this
network policy.
• DSCP Value—Select the DSCP value to associate with application data
sent by neighbors. This informs them how they should mark the application
traffic they send to the switch.
Click Apply. The network policy is defined. Associate the network policy with a
port by using the LLDP MED Port Settings Page.

Configuring LLDP MED Port Settings

The LLDP MED Port Settings Page
configured in the LLDP MED Network Policy Page, to be advertised on the port,
and selecting the LLDP-MED TLVs to be sent inside the LLDP PDU.
To configure LLDP MED on each port:
Click Administration > Discovery - LLDP > LLDP MED Port Settings. The LLDP
MED Port Settings Page opens.
This page displays LLDP MED settings, including enabled TLVs, for all ports.
Select a port, and click Edit. The Edit LLDP MED Port Settings Page opens.
This page enables associating LLDP MED policies to ports.
Enter the parameters.
• Port—Select a port to configure. After you have configured this port and
clicked Apply, you can configure another port without returning to the LLDP
MED Port Settings Page.
• LLDP MED Status—Enable/disable LLDP MED on this port.
enables selecting the network policies,
7
65