Displaying Lldp Port Status - Cisco 200 Series Administration Manual

Configuring Discovery
Configuring LLDP
STEP 4
Cisco Small Business 200 Series Smart Switch Administration Guide
• System Log Notification—Select whether the log notification is sent on a
per-port basis, when an end station that supports MED has been discovered.
• Available Optional TLVs—Select the TLVs that can be published by the
switch, by moving them to the Selected Optional TLVs list.
• Available Network Policies—Select the LLDP MED policies that will be
published by LLDP, by moving them to the Selected Network Policies list.
These were created in the
The following fields must be entered in hexadecimal characters in the
NOTE
exact data format that is defined in the LLDP-MED standard (ANSI-TIA-
1057_final_for_publication.pdf).
• Location Coordinate—Enter the coordinate location to be published by
LLDP.
• Location Civic Address—Enter the civic address to be published by LLDP.
• Location (ECS) ELIN—Enter the Emergency Call Service (ECS) ELIN
location to be published by LLDP.
Click Apply. The LLDP MED port settings are modified, and the switch is updated.

Displaying LLDP Port Status

The LLDP Port Status Table Page
the LLDP status for every port.
To view the LLDP port status, click Administration > Discovery - LLDP > LLDP
LLDP Port Status Page
Port Status. The
LLDP Port Status Global Information
• Chassis ID Subtype—Type of chassis ID (for example, MAC address).
• Chassis ID—Identifier of chassis. Where the chassis ID subtype is a MAC
address, the MAC address of the switch is displayed.
• System Name—Name of switch.
• System Description—Description of the switch (in alpha-numeric format).
• Supported System Capabilities—Primary functions of the device, such as
Bridge, WLAN AP, or Router.
LLDP MED Network Policy Page.
displays the LLDP global information, as well as
opens.
7
66