Mitsubishi Electric MELSEC-Q Series User Manual page 213

(d) Process after the completion of the G(P).RLPASET instruction
After the completion of the G(P).RLPASET instruction, turn on Refresh instruction when changing parameters
by the dedicated instruction (SB0003) and refresh cyclic data.
[When all the stations are normal]
process
Program
Data link stop
Host data link status
(X01)
Refresh instruction when
changing parameters
by the dedicated instruction
(SB0003)
Data link stop
(SB0002)
Data link stop complete
(SB0045)
G(P).RLPASET instruction
direction device
Complete device
Status display device
at completion
[When all the stations are faulty]
End
process
Program
Data link stop
Host data link status
(X01)
Refresh instruction when
changing parameters
by the dedicated instruction
(SB0003)
Data link stop
(SB0002)
Data link stop complete
(SB0045)
G(P).RLPASET instruction
direction device
Complete device
Status display device
at completion
End End End
process process
Refresh stop
End End
process process
Refresh stop
CHAPTER 9 DEDICATED INSTRUCTIONS
End End End
process process process
Refresh start
Data link start
G(P).RLPASET
instruction
completion
ON
ON
Abnormal end
1 scan
End End End
process process process
Data link start Data link start Data link start
Return to system process
G(P).RLPASET
instruction completion
ON
ON
Abnormal
end
1 scan
Return to system
9
End
process
End
process
Refresh start
211