*1
If parameter settings have been configured using dedicated instructions, the data is held.
If parameter settings have been configured using a programming tool, the data is cleared when Y is set to the refresh
device of the remote output (RY). The data is held or cleared according to the parameter settings when the device other
than Y is set.
*2
When Y is set to the refresh device of the remote output (RY) in the local station that has stopped, only the remote
output (RY) in the stopped local station is cleared. The data is held or cleared according to the parameter settings when the
device other than Y is set.
Data link is continued for the other local stations.
124