Printer 4-Color: Void Areas, White Spots - Olivetti d-Color MF201 Service Manual

Field Service Ver. 1.0 Jun. 2008
19.3.34

Printer 4-color: void areas, white spots

A. Typical faulty images
B. Troubleshooting procedure
Step Section
Image check
1
2
Transfer belt unit Fingerprints, oil, or other foreign
3
4
Transfer roller
5
unit
6
Paper path
7
8
9
Y109660-1
Void areas
Check item
There are void areas at the front
side or high density section.
There are void areas in the trailing
edge.
matter is evident on the transfer
belt.
Transfer belt is dirty or scratched.
Transfer roller is dirty or scratched.
Charge neutralizing cloth is not
separated and ground terminal is
connected properly.
There is foreign matter on paper
path.
Pre-image transfer guide plate is
damaged or dirty.
The problem has been eliminated
through the checks of steps up to 8.
Sevice Manual
19. Image quality problem
White spots
Result Action
YES P.355
YES Perform [Transfer Adjust] of
[Image Process Adjustment]
under Service Mode.
YES Clean.
YES Clean dirty belt with a soft cloth.
Change transfer belt unit if belt is
damaged.
YES Change 2nd image transfer roller
unit.
NO Correct or change.
YES Remove foreign matter.
YES Clean or change.
NO Change transfer belt unit.
A02EF4C523DA
357