Troubleshooting; Downloading Updated Code Information - Radio Shack 15-1925 Owner's Manual

15-1925.fm Page 22 Monday, July 19, 1999 12:59 PM

TROUBLESHOOTING

If the 6 in 1 IR/RF Remote Control stops working
after you have successfully tested the control for
each device, or if you are unable to get the remote
control to work at all, check these things:
• Confirm that your remote control devices are
working properly by using the original remote
control or the manual controls.
• Be sure you press the device key for the
device you want to control before you press
any other key.
• Replace the batteries.
• If some of the keys do not function for your
device, you might be able to search for a bet-
ter device code.
DOWNLOADING UPDATED
CODE INFORMATION
If you are still experiencing difficulties getting your
equipment programmed with the 6 in 1 IR/RF Re-
mote Control, you might want to upgrade your re-
mote control with new codes. This can be done by
simply calling our toll-free RadioShack Customer
Service Hotline at 1-800-950-7044.
Important: If you have already set up your 6 in 1
for other equipment, downloading updated infor-
mation erases those codes from the 6 in 1's mem-
ory.
Note: Your remote control's telephone upgrade
feature is designed to work with any telephone
that meets current FCC specifications for hearing
aid compatibility. Please do not use cordless or
cellular phones when calling for a telephone up-
grade.
Need help? Call 1-800-950-7044
22