Intercom And Paging Operation; Making An Intercom Call - Radio Shack 4-Line System Speakerphone with Caller ID and Headset Jack Owner's Manual

5. When you finish the conversation, press
to hang up.
SPKR PHONE
Be sure to replace the headset jack's rubber
cover when you finish using a headset.
ˆ

Intercom and Paging Operation

You can call other stations connected to the
same phone line using either the intercom or
the paging feature.
Using the phone's intercom feature lets you
make a telephone call to another station so
you can conduct a two-way conversation
when the called station answers.
Using the phone's paging feature lets you
announce your message directly to one or all
of the stations instead of making the stations
ring.
• If no station answers, your page is sim-
ply making a one-way call.
• When a station answers, your page
changes into an intercom call.
MAKING AN INTERCOM
CALL
Before you make an intercom call, check the
intercom status indicator to be sure no one
else is using the intercom.
Indicator
Off Not in use
Displays steadily In use by another station
Flashes rapidly Receiving an intercom call
Flashes once In use/Making an intercom
every 2 seconds call
1. Press to use the intercom
INTERCOM
with the speakerphone or headset.
20
Note: Connecting a headset disconnects the
handset's earpiece and microphone.
2. Within 10 seconds, enter the extension
Notes:
• If the called party does not answer your
• If you do not dial the extension number
• You can use the upper memory location
Status
• If the called station's DND feature is acti-
• An intercom call to one station can be
ICM
Intercom and Paging Operation
appears, and you hear a steady tone
through the speaker or headset.
Or, lift the handset, then press
. ICM appears and you hear a
COM
steady tone through the handset.
number ( to ) for the station you
11 22
want to call. That station's intercom indi-
cator flashes rapidly, and that station
repeatedly sounds a double ring.
intercom call, you can page that station
by pressing .
PAGE
within 10 seconds after pressing
, the telephone sounds a steady
COM
tone and you must redial.
buttons to dial an extension number. For
example, use the first location button to
dial extension 11, the second location
button to dial extension 12, the third
location button to dial extension 13, and
so on.
vated, or the called station is busy, your
telephone sounds an intercom busy sig-
nal.
answered by any other station.
INTER-
INTER-