Enabling And Disabling Telephone Lines; Setting The Area Code; Adjusting The Ringer Volume - Radio Shack 4-Line System Speakerphone with Caller ID and Headset Jack Owner's Manual

Notes:
• You must enter two digits for the month,
date, hour, and minute.
• The clock uses the 12-hour format.
Follow these steps to set the time and date.
1. Press
CLOCK/FORWARD
TIME 00:00 6 00:00 AM
2. Enter the desired values. The telephone
rings after you enter the last setting.
Notes:
• The phone automatically sets the year
when you enter the month, date, and
day.
• When you make an invalid entry (such
as 13 for the month), the phone rings
and the display shows the previously
stored time and date. If this happens,
simply start from Step 1.
• If you make a mistake when entering the
date and time, simply start from Step 1.
ENABLING AND DISABLING
TELEPHONE LINES
Follow these steps to enable or disable tele-
phone lines.
Note: If you do not have four subscribed
telephone lines for the phone, be sure to dis-
able the unused line. Otherwise, records
from the active lines may be recorded on the
unused line.
1. Press .
PROGRAM MEMORY
#
2. Press and .
3. Press the number key
select the telephone line you want to
enable or disable.
12
4. Press
5. Press

SETTING THE AREA CODE

Note: If you do not complete each step with-
in 30 seconds, the phone exits programming.
. SET DATE/
Start again at Step 1.
appears.
1. Press
2. Enter a 3-digit area code.
3. Press
To delete the area code, press
then
ADJUSTING THE RINGER
VOLUME
Your phone has four ringer volume levels for
each line — off, low, middle, and high. Follow
these steps to adjust the ringer volume when
the phone is not being used.
1. Press
2. Press
3. Press
appears.
, , , or to
1 2 3 4
Preparation
to enable or
1 0
telephone line.
. The phone beeps once.
HOLD
. MEMORY
PROGRAM
. The phone rings once.
HOLD
. The phone rings once.
HOLD
.
CONFERENCE
, , , or on the keypad to
1 2 3 4
select the desired phone line.
8 8 8 8
or
VOLUME VOLUME
adjust the ringer volume.
To turn off the ringer volume, repeatedly
9 9 9 9
press until the ringing
VOLUME
stops.
To adjust a line's ringer volume when
that line rings, simply press
9 9 9 9
or .
VOLUME
Note: If there is more than one line ring-
ing at the same time, pressing
8 8 8 8 9 9 9 9
or adjusts the ringer vol-
VOLUME
ume for each line that is ringing.
to disable the
appears.
PROGRAM
9 9 9 9
to
8 8 8 8
VOLUME
VOLUME