Radio Shack 4-Line System Speakerphone with Caller ID and Headset Jack Owner's Manual page 10

To mount the phone directly on a wall ,
with the power cord and the modular
cords hanging over the bracket, align
the phone's keyhole slots with the
screws and slide the phone downward
to secure it, then plug the ends of the
modular cords into the modular phone
line jack(s) for Line 1 through 4.
6. Plug the AC adapter into a standard AC
outlet.
Initializing..
appears, then JAN 01 12:00 AM/EXT
11 FRI appears.
7. Lift and rotate the handset holder 180°,
then snap it back into place so it holds
the handset.
Handset
Holder
8. Plug one end of the coiled cord into the
modular jack on the handset. Then con-
nect it to the jack on the left side of the
base. Place the handset in the cradle.
Note: Your local RadioShack store sells
a variety of longer coiled handset cords,
which are especially useful when you
mount the phone on the wall.
10
briefly
Installation