Configuring Linkup And Linkdown Traps For A Subset Of Interfaces - Cisco NCS 5000 Series Manual

Configuring LinkUp and LinkDown Traps for a Subset of Interfaces

Command or Action
Step 3
snmp-server cbqosmib cache refresh time time
Example:
RP/0/RP0/CPU0:router(config)# snmp-server mibs
cbqosmib cache
refresh time 45
Step 4 snmp-server cbqosmib cache service-policy count count
Example:
RP/0/RP0/CPU0:router(config)# snmp-server mibs
cbqosmib cache
service-policy count 50
Step 5
snmp-server ifindex persist
Example:
RP/0/RP0/CPU0:router(config)# snmp-server ifindex
persist
Configuring LinkUp and LinkDown Traps for a Subset of Interfaces
By specifying a regular expression to represent the interfaces for which you are interested in setting traps,
you can enable or disable linkUp and linkDown traps for a large number of interfaces simultaneously.
Before You Begin
SNMP must be configured.
SUMMARY STEPS
1. configure
2. snmp-server interface subset subset-number regular-expression expression
3. notification linkupdown disable
4. commit
5. (Optional) show snmp interface notification subset subset-number
6. (Optional) show snmp interface notification regular-expression expression
7. (Optional) show snmp interface notification type interface-path-id
DETAILED STEPS
Command or Action
Step 1
configure
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
42
Purpose
(Optional)
Enables QoS MIB caching with a specified cache
refresh time.
(Optional)
Enables QoS MIB caching with a limited number of
service policies to cache.
Enables ifIndex persistence globally on all Simple
Network Management Protocol (SNMP) interfaces.
Purpose
Implementing SNMP