Cisco NCS 5000 Series Manual page 141

System management configuration guide for cisco ncs 5000 series routers
Hide thumbs Also See for NCS 5000 Series:
Table of Contents

Advertisement

Upgrading FPD
Field
FPD Description
Type
Subtype
SW Version
Min Req SW Vers
Min Req HW Vers
This example shows the output display for ASR9912 and ASR9922:
RP/0/RP0/CPU0:router # show fpd package
=============================== ================================================
Card Type
==================== ========================== ==== ======= =========== ======== =========
ASR-9912-BPID2
----------------------------------------------------------------------------------------------
ASR-9922-BPID2
----------------------------------------------------------------------------------------------
A9K-BPID2-10-SLOT
----------------------------------------------------------------------------------------------
A9K-BPID2-6-SLOT
----------------------------------------------------------------------------------------------
ASR-9922-SFC110
================================================
FPD Description
Can Bus Ctrl (CBC) BP2
Can Bus Ctrl (CBC) BP2
Can Bus Ctrl (CBC) BP2
Can Bus Ctrl (CBC) BP2
Can Bus Ctrl (CBC) BP2
Can Bus Ctrl (CBC) BP2
Can Bus Ctrl (CBC) BP2
Can Bus Ctrl (CBC) BP2
Can Bus Ctrl (CBC) MTFC
Fabric Ctrl0 MTFC
Can Bus Ctrl (CBC) MTFC
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
show fpd package Command Output: Example
Description
Description of all FPD images available for the SPA.
Hardware type. Possible types can be:
• spa—Shared port adapter
• lc—Line card
FPD subtype. These values are used in the upgrade
hw-module fpd command to indicate a specific FPD image
type to upgrade.
FPD software version recommended for the associated module
running the current Cisco IOS XR software.
Minimum required FPD image software version to operate
the card. Version 0.0 indicates that a minimum required image
was not programmed into the card.
Minimum required hardware version for the associated FPD
image. A minimum hardware requirement of version 0.0
indicates that all hardware can support this FPD image
version.
Field Programmable Device Package
Type Subtype
bp
cbc
lc
cbc
bp
cbc
lc
cbc
bp
cbc
lc
cbc
bp
cbc
lc
cbc
fc
cbc
fc
fpga7
lc
cbc
SW
Min Req
Min Req
Version
SW Ver
HW Vers
7.104
0.00
7.104
0.00
7.104
0.00
7.104
0.00
7.104
0.00
7.104
0.00
7.104
0.00
7.104
0.00
28.03
0.00
1.01
0.00
28.03
0.00
131
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents