Position Send - Standard Horizon MATRIX GX1280S Owner's Manual

6.9 POSITION SEND

The position send mode may be used to send your position to another radio
with this feature. Your vessel must have an operating GPS receiver con-
nected to its MATRIX to send the position and must not have its transceiver
set to deny position send.
When other vessel receives your position, the trans-
ceiver outputs a NMEA DSC sentence which may be
used by a Standard Horizon GPS chart plotter to show
your position.
1. Select a traffic channel, then press the [ CALL/SET ]
key. The "DSC OPERATION" menu will appear in
the display.
2. Turn the CHANNEL selector knob to select the
"POS SEND."
3. Press the [ CALL/SET ] key to select the Position
send directory. This directory uses the INDIVIDUAL
Directory information.
4. Turn the CHANNEL selector knob to select a
name.
5. Press the [ CALL/SET ] key to transmit your posi-
tion DSC call.
6. After your position DSC is transmitted, the resend
menu will appear. When you send your position
DSC again, select "SEND" and press the [ CALL/
SET ] key. When you exit the mode, select "EXIT"
and press the [ CALL/SET ] key.
7. The transceiver returns to radio mode.
GX1280S
FCC ID: K66GX1280S
Page 31
Vertex Standard Co., Ltd.