Position Send; Setting Up Position Send Ringer; Transmitting A Dsc Position Send Call - Standard Horizon PHANTOM PS1000 Owner's Manual

Phantom series 25 watt vhf/fm marine transceiver
Hide thumbs Also See for PHANTOM PS1000:
Table of Contents

Advertisement

3
Select type of reply function "
by using the [ ] or [ ] key.
S E N D
4. W h e n "
[ CALL ( SET ) MENU ] key. And your position will be
transmitted to the requesting vessel.
5. To exit from position request display, press the [ 16/9 ] key.

11.9 POSITION SEND

The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to an-
other vessel. Your vessel must have an operating GPS receiver connected for
the Phantom PS1000 to send the position.
11.9.1 Setting up a Position Send Ringer
The PS1000 has the capability to turn off the Position Send ringer.
1. Press and hold down the [ CALL ( SET ) MENU ] key
until "
RADIO SETUP
2. Press the [
then press the [ CALL ( SET ) MENU ] key.
3. Press the [ ] or [ ] key to select "
then press the [ CALL ( SET ) MENU ] key.
4. Press the [
menu, then press the [ CALL ( SET ) MENU ] key.
5. Press the [ ] or [ ] key to select "
6. Press the [ CALL ( SET ) MENU ] key to store the se-
lected setting.
7. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
If you wish to return to enabling the ringer tone, just repeat the above proce-
dure, pressing the [ ] or [ ] key to select "

11.9.2 Transmitting a DSC Position Send Call

1. Press the [ CALL ( SET ) MENU ] key. The DSC Op-
eration menu will appear.
2. Press the [ ] or [ ] key to select "
then press the [ CALL ( SET ) MENU ] key. The trans-
ceiver will beep, and the "Position Send directory"
will appear. (To cancel, press the [ 16/9 ] key)
3. Press the [ ] or [ ] key to select the "name" you
want to contact.
4. Press the [ CALL ( SET ) MENU ] key to send your position
to the selected vessel.
Phantom PS1000
SEND
" i s s e l e c t e d , p r e s s t h e
" menu appears.
] key to select "
DCS SETUP
] or [
] key to select "
" or "
NO REPLY
" menu,
DSC BEEP
" menu,
POS SEND
oF
."
on
" in step "5" above.
POS SEND
" menu,
"
"
Page 45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents