Position Send; Transmitting A Dsc Position Send Call - Standard Horizon MATRIX GX1280S Owner's Manual

Standard horizon vhf/fm marine transceiver owner's manual

Hide thumbs Also See for MATRIX GX1280S:

Table of Contents

4. When "REPLY" is selected, press the [ CALL/SET ] key. And the your

position will be transmitted to the requesting vessel.

5. To exit from position request display, press any key.

7.8.3 Position Send

The feature is similar to Position Request, however instead of requesting a

position of another vessel this function allows you to send your position to

another vessel. Your vessel must have an operating GPS receiver connected

for the MATRIX to send the position.

To transmit a Position Send Call, you must setup the MATRIX DSC

Individual / Position Call Directory with the name of the vessel(s) or

person and the MMSI of the DSC radio you wish to send your position

to. To setup this directory refer to section 7.7.1 Setting up the Individual

/ Position Call Directory.

1. Press the [ CALL/SET ] key. The "DSC OPERA-

TION" menu will appear in the display.

2. Turn the CHANNEL selector knob to select the

"POS SEND."

3. Press the [ CALL/SET ] key to select the Individual

directory.

4. Turn the CHANNEL selector knob to select a name

in the directory.

5. Press the [ CALL/SET ] key to send your position

to the selected vessel.

6. After your position is transmitted, the resend menu

will appear. To send your position again, select

"SEND" and press the [ CALL/SET ] key.

7. To exit the mode, select "EXIT" and press the

[ CALL/SET ] key.

Page 46

NOTE

GX1280S

Table of Contents