Standard Horizon MATRIX GX1280S Owner's Manual page 38

lector knob.
4 Press the [ CALL/SET ] key, then turn the CHAN-
NEL selector knob to change the scrambler code.
The scrambler code can be set from "0" to "3" and
"OFF." When "OFF" is selected, the voice scram-
bler is disabled.
5. Press the [ CALL/SET ] key to store the selected
code.
6. Select "CHANNEL" in the "SCRAMBLER" menu
with the CHANNEL selector knob, then press the
[ CALL/SET ] key.
7. Turn the CHANNEL selector knob to change the
Scrambler channel.
8. Press the [ CALL/SET ] key to store the selected
channel. Repeat steps 6 and 7 to set other chan-
nels.
9. Press and hold down the [ CALL/SET ] key.
10. Tune the CHANNEL selector knob to select "EXIT," then press the [ CALL/
SET ] key to return to the normal operation.
This menu will not appear unless a CVS2500 is installed.
7.7 CH NAMING
1. To select USA, INT or CANADA, press and hold
the [ 16/9 ] key and press [ WX ] key.
2. Press and hold down the [ CALL/SET ] key until
"RADIO "SETUP" menu appear.
3. Press the [ CALL/SET ] key, then select "CH NAME"
in the "RADIO SETUP" menu with the CHANNEL
selector knob.
4. Press the [ CALL/SET ] key.
5. Turn the CHANNEL selector knob to select the
channel to be named and press the [ CALL/SET ]
key.
6. Turn the CHANNEL selector knob scroll through
the alphabet and 0 - 9.
7. Press the [ CALL/SET ] key to enter the desired
letter and move the cursor one space to the right.
Page 38
NOTE
FCC ID: K66GX1280S
GX1280S
Vertex Standard Co., Ltd.