Batch Load - Mitsubishi Electric L02SCPU User's Manual And Reference

4.7.4

Batch load

Data saved in the SD memory card by the batch save function can be read to the CPU module.
This function can be executed only when the CPU module is in STOP status.
(1) Operating procedure
The following is the procedure for batch-loading data.
"Memory card operation menu" screen
"Batch load target folder" screen
"Batch load execution" screen
"Drive format execution" screen
"Drive formatting" screen
"Batch loading" screen





CHAPTER 4 DISPLAY UNIT FUNCTIONS
1.
Select "BATCH LOADING" using the  and 
buttons and press the
2.
Select a load-target folder using the  and 
buttons and press the
Folders in the "SaveLoad" folder can only be loaded.
3.
Select "YES" using the  and  buttons and press
the button.
OK
To overwrite read-only files, the overwrite confirmation
screen appears.
4.
Select "YES" using the  and  buttons to format
all drives in the CPU module and press the
*1
button.
When "NO" is selected, the batch load function is
executed without formatting the drives.
5.
When all drives are formatted, the "Drive
formatting" screen is displayed and then the "Batch
loading" screen is displayed.
During the format processing or the batch load
processing, button operations on the display unit are
disabled.
button.
OK
button.
OK
OK
* 2
281
4