4.5
Module Settings
Values set to intelligent function modules can be checked and changed with the display unit.
4.5.1
Initial setting change
The initial setting value of an intelligent function module can be changed.
The changed value is reflected to the CPU module after any of the following operations are performed.
• Powering off and then on the CPU module
• Resetting the CPU module
• Setting the CPU module from STOP to RUN
*1
Perform this operation twice. (STOPRUNSTOPRUN)
Write the following items to the CPU module before changing the initial setting. If the setting is changed before the items are
written, an error message will be displayed.
• Intelligent function module parameters ( Page 77, Section 2.11 (1))
• Menu definition file ( Page 272, Section 4.5.1 (2))
270
*1