Module Error Collection Function - Mitsubishi Electric L02SCPU User's Manual And Reference

3.27

Module Error Collection Function

This function collects errors occurred in the connected intelligent function modules in the CPU module. By storing the
errors in a memory that can hold data in the event of power failure, the errors can be held even after power-off or reset.
Error history (CPU module including built-in I/O and built-in
CC-Link) and error log (intelligent function module) are
displayed on one screen.
Errors that occurred in the entire system can be monitored
in reverse chronological order.
Error history display
Time Module in error Error code
19:29
19:33
19:34
19:36
[Example of screen display]
Remark
When GX Developer is used, note that the error history cannot be displayed although the parameters for this function can be
set.
(1) Supported module
The CPU module collects errors occurred in the connected intelligent function modules. The CPU module does
not collect errors of those modules on other stations in the network.
(2) Timing when module errors are collected
Module errors are collected in END processing. Executing the COM instruction does not collect errors.
(3) Storing module errors
The module errors are stored in below, separately from error history data.
• System memory
• Standard RAM: 1000 errors
*1 The memory is managed inside the system.
CPU
19:33 Error C1 occurred!
Programming tool
Module A Error A1
CPU Error C1
Module B Error B1
Module A Error A2
*1
: 100 errors (fixed)
CHAPTER 3 CPU MODULE FUNCTIONS
Module A
19:29 Error A1 occurred!
19:36 Error A2 occurred!
Module error log
Error history (CPU module)
Time Module in error Error code
19:33 Error C1 19:29
19:34
19:36
Module B
19:34 Error B1 occurred!
Module A Error A1
Module B Error B1
Module A Error A2
171
3