Remote Operation; Remote Run/Stop - Mitsubishi Electric L02SCPU User's Manual And Reference

3.12

Remote Operation

Remote operation allows externally (by programming tool, external devices using the MC protocol, or using remote
contacts) changing the operating status of the CPU module. There are four types of remote operations:
• Remote RUN/STOP ( Page 112, Section 3.12.1)
• Remote PAUSE ( Page 114, Section 3.12.2)
• Remote RESET ( Page 116, Section 3.12.3)
• Remote latch clear ( Page 117, Section 3.12.4)
(1) The relationship between a CPU module and a remote operation.
Availability of remote operations varies depending on the status of a CPU module.
CPU module status
Remote RUN
RUN status
STOP status
*1 Including the stop error status of the CPU module.
3.12.1

Remote RUN/STOP

This operation externally changes the operating status of the CPU module to RUN or to STOP, keeping the switch of
the CPU module in the RUN position.
This operation is useful when:
• the CPU module is inaccessible, or
• changing the status of a CPU module that is in a control panel to RUN or STOP by external signals.
(1) Program operation
(a) Remote RUN
The CPU module changes its operating status to RUN and executes a program from the step 0. (The remote
RUN operation must be performed to the CPU module whose operating status has been changed to STOP by
the remote STOP operation.)
(b) Remote STOP
The CPU module executes a program until the END instruction and changes its operating status to STOP.
(2) Executing method
The following three methods are available.
• Using a RUN contact
• Using a programming tool
• By an external device using the MC protocol
• Using the link dedicated instruction of the CC-Link IE Field Network master/local module
112
Remote STOP
RUN status STOP status
STOP status STOP status
Remote operation
Remote PAUSE Remote RESET
PAUSE status Not operable
STOP status
Reset
Remote latch clear
Not operable
*1
Latch clear