Function List - Mitsubishi Electric L02SCPU User's Manual And Reference

4.1

Function List

The following table lists the functions of a display unit.
Category
Device monitor/test
Device
clear
Forced
on/off
Scan time monitor
CPU monitor/test
Built-in I/O
function
monitor
Error
display
CPU settings Clock setting
Module
Buffer memory monitor/test
monitor/test
Module settings Initial setting change
User message User message
File list/delete
Free space check
Memory card
operation
Batch save
Batch load
Language setting
Contrast adjustment
OPTIONS
Lighting period setting
Pop-up setting
240
Function name
DEV MON/TEST
Device memory clear DEVICE MEMORY
File register clear FILE REGISTER
Forced on/off registration SET ON/OFF
Forced on/off clear CLR FORCE
Forced on/off batch clear CLR ALL FORCES
Forced on/off list LIST FORCES
SCAN TIME MON
Built-in positioning function
BLT-IN POSITION
monitor
Built-in high-speed counter
BLT-IN COUNTER
function monitor
Built-in I/O function error
BLT-IN ERR CLR
clear
Current error monitor MONITOR
Error log display LOG
Error clear CLEAR
CLOCK SETTING
BUF MEM MON/TES
INIT CHANGE
USER MESSAGE
FILE LIST/DEL
FREE SPACE
BATCH SAVING
BATCH LOADING
LANGUAGE
CONTRAST
BACKLIGHT
POP BLK DISABLE
Displayed
function name
Monitors and tests device memory values.
Clears all device memory values.
Clears values of file register including extended
data register and extended link register.
Forcibly turns on or off devices X and Y.
Clears a forced on/off-registered device.
Clears all forced on/off-registered devices.
Lists forced on/off-registered devices.
Displays the current value, maximum value,
and minimum value of scan time.
Displays the setting values of the built-in
positioning function.
Displays the setting values of the built-in high-
speed counter function.
Clears errors of the built-in I/O function.
Displays the current error code, message,
common information, and individual
information.
Displays information of error logs.
Clears continuation errors.
Sets the internal time of the CPU module.
Monitors and tests the buffer memory value of
the selected module.
Sets the initial value of the selected module.
Checks a user message executed by the
UMSG instruction.
Displays folders and files stored in an SD
memory card in a list, and deletes a specified
folder or file.
Displays the free space on an SD memory card.
Saves data in the CPU module into an SD
memory card.
Loads data in an SD memory card to the CPU
module.
Selects a displayed language.
Sets tone of displayed characters.
Sets a period while the backlight is on.
Enables pop-up display.
Description Reference
Page 241,
Section 4.2.1
Page 249,
Section 4.2.2
Page 251,
Section 4.2.3
Page 254,
Section 4.2.4
Page 255,
Section 4.2.5
Page 259,
Section 4.2.6
Page 263,
Section 4.3
Page 265,
Section 4.4
Page 270,
Section 4.5
Page 273,
Section 4.6
Page 274,
Section 4.7.1
Page 279,
Section 4.7.2
Page 280,
Section 4.7.3
Page 281,
Section 4.7.4
Page 283,
Section 4.8.1
Page 284,
Section 4.8.2
Page 285,
Section 4.8.3
Page 286,
Section 4.8.4