Project Data Batch Save/Load Function - Mitsubishi Electric L02SCPU User's Manual And Reference

3.36

Project Data Batch Save/Load Function

This function saves data in the CPU module to an SD memory card, and also reads the data saved in an SD memory
card to the CPU module.
This function enables users to read/write data (such as program file and parameter file) without using a personal
computer.
3) The CPU module
information in the received
data is edited for GX Works2.
4) The edited data
is sent back to the
SD memory card.
Multiple folders can
be created according
to data.
Remark
Before executing this function, check the version of the CPU module used. ( Page 376, Appendix 2)
The L02SCPU and L02SCPU-P do not support this function.
202
2) Data with the CPU module
information is sent.
The saved data
can be edited
remotely.
SaveLoad folder
Data in the program
memory
Data in the standard
ROM
Data in the SD
memory card
LCPU
SD memory card
1) Data are saved
to the SD
memory card.
Data in the
standard RAM
Saving data
Loading data
Device
data
5) Data are read
from the SD
memory card.
System
file
Data (such as program
file and device data) in
the CPU module can be
saved or loaded using
a display unit.
CPU module
Inside the CPU module
Program memory Standard RAM
Standard ROM
Device
data
SD memory card
SD memory card