3.21
Realtime Monitor Function
This function monitors the data in the specified device of the CPU module at a specified interval or at a desired timing
in real time.
The function can be set with GX LogViewer, where the value changes of a specified device can be shown graphically.
Saving the set data and displayed graphs makes it possible to simplify the settings and check the graphs at a later
time.
Remark
● Before executing this function, check the versions of the CPU module and GX LogViewer used. ( Page 376,
Appendix 2)
● The L02SCPU and L02SCPU-P do not support this function.
● For details on the realtime monitor function, refer to the following.
GX LogViewer Version 1 Operating Manual
150
GX LogViewer
Data in the specified
device can be
monitored in real time.