Table of Contents
Advertisement
43-1099.fm Page 18 Tuesday, August 17, 1999 4:19 PM
Editing or Deleting a Memory
Number
1. Lift the handset. If
press
to turn it off.
TALK
2. Press
.
FUNCTION
and
MEM-1 EDIT-0
3. Press
to select
0
appears.
TION?
4. Enter the memory location number
(01-20) for the number you want to
edit or delete. The display shows
the location number, name, and
phone number.
Note: You can scroll through the
memory locations by pressing s or t.
5. To delete the selected number, hold
down
until the handset
DELETE
beeps and
No memory
To edit the number, press
peatedly press
DELETE
some or all of the number, then en-
ter the new number (in reverse or-
der) and press
MEM
Note: To edit the name without edit-
ing the number, simply press
twice.
To edit the name, use the s, t,
and
keys as described in Step 6
of "Storing a Number and Name in
Memory" on Page 17.
6. Press
.
STORING
MEM
pears.
18
Entering a Pause
In some telephone systems, you must
dial an access code (9, for example) and
appears,
talk
wait for a second dial tone before you
can dial an outside number. You can
DIAL MEMORY?
store the access code with the phone
appear.
number. However, you should also store
a pause after the access code to allow
.
EDIT
LOCA-
the outside line time to connect.
To enter a 2-second pause while storing
a phone number, press
pears. You can add more pause entries
for a longer pause.
appears.
. Re-
MEM
Dialing a Memory Number
to delete
again.
MEM
,
You can also select a memory number
before you press
then enter the desired location number,
or use s and t to scroll through the mem-
ory locations. The display shows the lo-
briefly ap-
cation
number. Then press
1. Lift the handset and press
appears.
talk
2. Press
and enter the memory
MEM
location number (01-20) for the
number you want to dial.
TALK
number,
name,
TALK
.
ap-
PAUSE
P
, so
TALK
. Press
,
MEM
and
phone
.
Advertisement
Table of Contents
