Screening A Call - Radio Shack 43-3871 Owner's Manual

Setting the call screen
You can screen calls when the Call Screen
function is set to On. Ô
1. Press
CLOCK/MENU
The current Call Screen setting (On or
Off) appears on the base and it is
announced.
2. Press
SKIP/SELECT
REPEAT/SELECT
3. Press . A confirmation tone sounds,
SET
and the system announces the new
setting.

Screening a call

From the base
To screen an incoming call, do the steps as
follows:
1. After the answering system answers,
the base speaker will let you hear the
calls as the machine records the
message. To adjust the volume, press
VOL/RING/
the answering system to Off, you
cannot screen a call.
To mute the call screen temporarily,
press
PLAY/
is answering.
2. To answer the call, press
pick up the handset from the base
(when AutoTalk is set to On). If the
handset is away from the base, press
,
TALK/FLASH
key,
/tone/<
Answer is set to On). The answering
system will disconnect automatically.
seven times.
or
to choose
or . If you set
VOL/RING/
when the system
STOP
SPEAKER
or any number
SPEAKER
or (when Any Key
#/>
Ô
• If you mute the ringer,
you can not screen the
call.
• If you press TALK/
FLASH, call screen will
be canceled and the
handset is put in talk
mode.
or .
or
Ô
NOTES
57