Screening A Call - Radio Shack 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital Answerer Owner's Manual

Ô Ô
NOTES
• If you press TALK/
FLASH, call screen will
be canceled and the
handset is put in talk
mode.
• If you press the SCREEN
soft key while another
handset is screening a
call, you will hear a beep
and you can not screen a
call.
64

Screening a call

From the base
To screen an incoming call, do the steps as
follows:
1. After the answering system answers,
the base speaker will let you hear the
calls as the machine records the
message. To adjust the volume, press
or
VOL/RING/ VOL/RING/
the answering system to Off, you
cannot screen a call.
To mute the call screen temporarily,
press
PLAY/ STOP
is answering.
2. To answer the call, press
pick up the handset from the base
(when AutoTalk is set to On). If the
handset is away from the base, press
,
TALK/FLASH SPEAKER
key, or
/TONE/< #/>
Answer is set to On). The answering
system will disconnect automatically.
From the handset
1. Press the soft key when the
SCREEN
system is answering.
To mute the call screen, press the
soft key when the system is
MUTE
answering.
2. To answer the call, press
or any number key,
SPEAKER
<, or > (when Anykey Answer is set to
#/
on).
To cancel the call screen, press
The answering system will disconnect
automatically.
. If you set
when the system
or
SPEAKER
or any number
(when Any Key
TALK/FLASH,
/TONE/
.
END