3-Way Conferencing; Flash And Call Waiting; New Message Led - Radio Shack 43-3871 Owner's Manual

Ô
NOTE

3-Way Conferencing

• If you have more than
one handset, the phone
permits 4-way
conversations, see "4-
way Conferencing" on
page 46 for details.

Flash and Call Waiting

• You must subscribe
through your local
telephone company to
receive Call Waiting or
Caller ID on call waiting
service.
32
To exit the Privacy Mode, repeat above
step again when the Privacy Mode is
on.
3-W
Ô
The phone permits 3-way conversations
between the handset, base, and an outside
line. Ô
When speaking on the handset
1. Press
the 3-way conversation.
2. To hang up, press
base. The handset will still be
connected to the call.
When speaking on the base
1. Press
handset to initiate the 3-way conversation.
2. To hang up, return the handset to the
cradle, or press
handset. The base will still be
connected to the call.
F
LASH AND
If you have Call Waiting service and a call
waiting tone sounds while you are on a call,
press
call. There is a short pause, and then you
will hear the new caller. To return to the
original caller, press
N
EW
The new message LED on the handset is
designed to work with your answering
system. The LED flashes when you have
new messages in your answering system.
The LED stops flashing when all new
messages are played back (see "Using your
Answering System" on page 58).
Privacy Mode Off
C
AY ONFERENCING
on the base to initiate
SPEAKER
SPEAKER
TALK/FLASH
END
C
ALL
to accept the waiting
TALK/FLASH
TALK/FLASH
M LED
ESSAGE
appears.
on the
or on the
SPEAKER
key on the
W
AITING
again. Ô