Repeating A Message - Radio Shack 43-3871 Owner's Manual

2. When all new messages have been
played, you hear a confirmation tone
and the system announces "End of
messages."The system returns to
standby. After you have reviewed your
new messages, you can play your old
messages by pressing
again. Once you have listened to a new
message, it then becomes an old
message. The old messages will be
played in the order in which they were
received.

Repeating a message

1. Press
PLAY/
messages. The number of stored
messages is announced.
2. To repeat the current message, press
REPEAT/SELECT
of beginning the message. To quickly
scroll backwards through a message,
press and hold
To repeat the previous message, press
REPEAT/SELECT
seconds (about 4 seconds during remote
operation) after a message begins
playing. If you have several messages,
press
REPEAT/SELECT
until you return to the message you want
to replay. If the current message is the
first new message, the system plays back
from the beginning of the current
message (it does not go back into the old
message group).
3. Press
PLAY/
stop reviewing messages and return to
standby.
The message counter shows the
number of messages stored in memory.
PLAY/ STOP
to review your
STOP
after a few seconds
REPEAT/SELECT
within a few
repeatedly
at any time to
STOP
.
59