Setting The Time - Radio Shack 43-3857 Owner's Manual

- (
PLAY/STOP
- Ten seconds elapse without a key press
- An incoming call is received
• If the system remains idle for about five
seconds after the announcement, the system
returns to standby. Once
pressed, the idle time is extended to ten
seconds.

Setting the Time

The clock on the answering system starts when
power is supplied to the base. Follow these steps to
set the clock to the correct time. Ô
1. Press
MENU/CLOCK
The system announces "Time", the current time
and the guidance for setting the time.
2. Press
/VOL/SEL
correct day is announced. The numbers [ ]
through [ ] are displayed on the base.
3. Press to select the day.
SET
4. Press
/VOL/SEL
the correct hour setting. The numbers [ ]
through [ ] are displayed on the base.
5. Press to select the hour.
SET
6. Press
/VOL/SEL
the correct minute setting. The numbers [ ]
through [ ] are displayed on the base.
7. Press to select the minute.
SET
8. Press
/VOL/SEL
the correct AM or PM setting. The message
counter displays [ ] or [ ].
9. Press to select the AM/PM setting.
SET
) is pressed
or
/VOL/SEL
.
or until the
/VOL/SEL
or until you hear
/VOL/SEL
or until you hear
/VOL/SEL
or until you hear
/VOL/SEL
is
Ô
NOTES
• Normally the idle time for
the menu mode is ten
seconds before the
system returns to
standby. However for
setting the time, the idle
time is extended to two
minutes.
• Press and hold
or
SEL
quickly scroll through the
numbers on the display.
Ô
/VOL/
to
/VOL/SEL
27